Fusion Forge Beta
Coming soon. Build your pistol in 3D.
Design your XP 3C, XP COMP or XP PRO V2 part by part and see it before you buy. Join the beta and you order yours before anyone else.
You are in. Check your email for your private link.It usually arrives within a minute. Open it to start designing and save your build. Not there? Look in your spam or promotions folder.
How the beta works
Get your private linkIt lands in your inbox right after you sign up.
Design and save your buildSave it to a free Fusion account.
Order before everyone elseTesters get the ordering link first.
This is a beta. Fusion Forge is brand new, so you may run into some issues. As a tester you help us find them, and in return you get first dibs on ordering.
Double-Stack 1911 Pistols and Parts
Three 9mm double-stack pistols, one standard. Carry it, race it, or run the flagship.
-
XP 3C
Sub-compact double-stack 1911
Disappears under a t-shirt. Holds up at the range.
- 3 in barrel, 6.75 in overall
- 15-round capacity, 10-round available
- Takes magazines compatible with GLOCK G19 pistols
- Standard or ambi thumb-ledge frame
View the XP 3CFrom$1,399
Ships in 45 to 60 days -
XP COMP
Compensated double-stack 1911
Stay on target. Outshoot the clock.
- 4.6 in barrel with integrated compensator
- 17-round capacity, 10-round available
- Takes magazines compatible with GLOCK G17 pistols
- RMR/SRO optic plate included
View the XP COMPFrom$1,449
Ships in 45 to 60 days -
XP PRO V2
Full-size double-stack 1911
The flagship, refined, with a new aluminum grip and sharper checkering.
- 4 in Commander-length, optic-ready slide
- 17-round capacity, 10-round available
- Takes magazines compatible with GLOCK G17 pistols
- Ported, threaded and ambi options
View the XP PRO V2From$1,149
In stock
Want yours in your own finish? Design it in 3D in Fusion Forge. Beta testers order first.
Join the Fusion Forge betaXF PRO
The striker fire that runs like a 1911. All steel, ready for duty, carry, or the range.
What Fusion owners say
From 443 customer reviews
-
Top Notch ... as usual
Prompt service / shipping. Always have what I need. Top Quality. Greatly appreciate Bob and his Fusion team.
Tom C. on 1911 Grip Screws - Slot, Black, Thin (4)
-
Best bullseye sight for 1911
This sight on my les baer 1911 is infinitely superior in design, construction, and function to Kensight. The detents are ball bearing and the fit and finish are a much needed upgrade to the Kensight I removed with its strange detent design that just does not work well
Ultrasound on 1911 - Bomar Rear Adjustable Sight - Black Target
-
Bling
Easy swap, definitely changes the esthetics
Ismael G. on XP Pro™ Torx Grip Screws - Bronze
-
Works well in my Comp'd & Ported XP with 1200fps 124gr, 1100
Works well in my Comp'd & Ported XP with 1200fps 124gr, 1100fps 147gr, and 990fps 147gr as well. Mine is well broken in at ~2400rds though so take that into consideration. When I got mine this option spring did not exist so I was running the 7lb previously
Jake on XP COMP 36 Constant Recoil Spring Kit – Stainless Steel
-
Extended slide stop
Great fit , now i don’t have to change my grip to close the slide.
Floyd C. on 1911 Slide Stop - 9mm/10mm - Extended, Thin Paddle Black
-
Fit perfectly. Took my jam-o-tic Gforce Arms 1911 A1 and mad
Fit perfectly. Took my jam-o-tic Gforce Arms 1911 A1 and made it run like butter. If you're having failure to feed issues, would definitely recommend this paired with the Wolff 18.5 lb Spring Tune up kit.
Jonathan G. on 1911 Firing Pin - 45 ACP, 70 Series Black
-
.278" STAINLESS SWING LINK REVIEW !!!!
SOME MINOR POLISHING WAS DONE ON THE OUTER EDGE & BOTH SIDES. STARTED WITH 6-0 EMERY CLOTH, THEN PROGRESSED TO 1500, 2500, & FINISHED WITH 4000. BUFFED ALL SURFACES WITH SOME "FLITZ" & MY DREMEL WITH SOME HARD FELT TIPPED BOBS. RETENTION PIN & SLIDE STOP PIN HOLES WERE A CLOSE FIT BUT DID NOT BIND !!!!! LINK WIDTH INSIDE THE BARREL "SWING SLOT" WAS VERY SMOOTH BUT HAD NO SIDE-TO-SIDE WOBBLE / WIGGLE. SO IF YOU NEED A NEW .278" BARREL LINK FOR A REBUILD PROJECT, I GIVE THIS PART "2 THUMBS WAY UP"!!!!!---SEMPER-FI & OORAH.
Michael W. / "GURU1911" on 1911 Barrel Link - #3 (Stainless)
-
made to perform
easy to install - works very well, installed on a Kimber .45 acp 1911 Custom LW, no interference problems with the Crimson Trace grips. Love my Fusion .45s and the parts are top notch also
Joseph D. on 1911 Magazine Catch - Extended, Black Serrated
XP PRO Parts
The most popular parts for the XP PRO platform — double-stack 1911 components designed around magazine compatibility for the Fusion XP platform.
View All XP Parts-
-
-
-
-
Fusion +5 Magazine Extension Kit for Magazines Compatible with GLOCK G17 Pistols - Blue (XP Pro Compatible)
Due to state laws on magazine capacity and parts, magazines and magazine …
$34.99 -
-
-
-
-
-
-
XF PRO Parts
Replacement components for the all-metal striker-fired XF PRO platform.
View All XF PartsFind your fit
Shop by Purpose
Choose how you'll use it.
Gunsmithing
From sight installations to full custom builds.
Newsroom
Product announcements, install guides, and behind-the-scenes stories from the Fusion team.
-
1911 Magwells and Mainspring Housings: What They Do and How to Choose
A magwell funnels your magazine for faster reloads. The mainspring housing shapes your grip and affects how the pistol points. Learn what e…
-
1911 Slides Explained: Slide Types, Slide Stop vs Slide Release, and Long Slides
Quick answer: A 1911 slide is the reciprocating upper assembly of the pistol. It houses the barrel, firing pin, extractor, and ejector port…
-
1911 Triggers Explained: Trigger Pull, Trigger Jobs and Drop-In Kits
A 1911 uses a single-action trigger that slides straight back, not a pivoting trigger like most modern pistols. Here is how it works, what …


























